LEVEL 5 DRYWALL FINISH

We are a drywall company specialized in finishing superior level gypsum walls for commercial or residential spaces.

Level 5 drywall finish in california

Gypsum panels are construction elements consisting of calcium sulfate and water, these elements are prefabricated and are characterized by being very light, they are usually used on walls and ceilings indoors, therefore, they are very required especially for remodeling processes residential and commercial

The installation of drywall has taken a lot of strength today given its ease, speed, and very clean installation, however, prior to the final decoration to be performed, different levels of finishing are applied on the drywall, these levels range from level 0 to level 5 finish.

With the application of the finishing levels, the joints, elements that hold the panels (as in the case of the fastening screws) and all other accessories are intended to be hidden by these layers of joint compound.

At the end of the application of the finish on the surface and according to the level of finish that is applied, the said surface may have (or not) marks of the work tools, burrs or stretch marks, in some levels they are accepted while in the more levels high no.

Likewise, also depending on the level of quality of the finish that is applied, the surface contrast is reduced when exposed to flush light since at no level of finish is it possible to achieve a completely flat surface.

If you are looking for certified and reliable drywall contractors in san francisco bay area, california, contact us now!

Finishing Levels of Drywall

Level 0 finishing of drywall to Level 5 finishing of drywall

Finishing levels of drywall: Level 0 finishing of drywall Finishing levels of drywall: Level 1 finishing of drywall Finishing levels of drywall: Level 2 finishing of drywall Finishing levels of drywall: Level 3 finishing of drywall Finishing levels of drywall: Level 4 finishing of drywall Finishing levels of drywall: Level 5 finishing of drywall

Finishing levels of drywall: Level 0 finishing of drywall

At this level, the finishing of the drywall does not receive great treatment, it is used most frequently in temporary constructions or in those residential or commercial remodeling projects in which the desired final finish has not been established.

Finishing levels of drywall: Level 1 finishing of drywall

At this level of finishing, tape and joint compound should be applied at all internal angles between the drywall, the excess of this compound, the marks of the work tools, burrs and stretch marks are acceptable at this level of finish.

For all the above, this level of finishing is recommended for areas where there is no public access since the final appearance will not be the best.

Finishing levels of drywall: Level 2 finishing of drywall

In this level of finish also applied compound for joints in the tape, but unlike the previous level, all the fastening screws will be covered by the compound and the excess of this compound is cleaned with a spatula, the marks of Work tools, stretch marks, and burrs.

It is advisable to apply this level of finish in areas that do not subsequently receive a final decoration of paint.

Finishing levels of drywall: Level 3 finishing of drywall

As in the previous levels, tape and joint compounds are applied at the interior angles of the drywall, the excess of the compound is cleaned leaving a thin layer of the compound on all joints and interior angles.

An additional layer of the compound is then applied over these interior angles and all fasteners are covered with the joint compound since in this level the marks of tools, splines or burrs are not accepted.

This level of finish is not recommended on smooth walls or continuous texture.

Finishing levels of drywall: Level 4 finishing of drywall

The joint compound is applied to all interior angles and the tape is placed in the joints, the excess compound is cleaned and a thin layer is left using a spatula, then an additional layer is applied over each interior angle while that the fasteners are covered with three layers of compound, in this way the marks of tools and stretch marks are completely eliminated.

This level of finish is recommended on surfaces that will be covered with decorative paper or any other coating.

Level 5 drywall finish: Top-level drywall finish

Among the different levels of drywall finish, level 5 drywall is the highest quality finish level, which achieves a smooth and attractive result for your walls, if you use high gloss paint, we recommend this level of finish.

Typically, this level 5 drywall finish is recommended in areas where smooth wall designs are decorated with bright decorative paints or finishes since the surface should be smooth and without marks or striations.

The level 5 drywall finish is the most effective method of providing a uniform surface to the walls, but to achieve the benefits of this top-level finish, the installation of drywall must have a drywall finish. Level 4 well done.

A level 5 drywall finish requires that a thin layer of joint compound be sprayed over the level 4 drywall finish and must have been well done, that is, hiring an experienced and certified company in the installation of drywall.

REQUEST A QUOTE!

FAQ

What is a level 5 drywall finish?
Level 5 is the highest quality finish level. There are different levels of finishing of drywall, each level works as a guide before the final decoration, as we mentioned before, from level 0 to level 5, basically at level 0 no treatment is done on the surface finish of drywall, while at level 5 multiple layers are applied to the surface. These levels were standardized by the Gypsum Association in document GA-214.

Why New Line Drywall for my level 5 drywall finish?
In New Line Drywall we have a team prepared and certified to adopt your project as your own and bring it to fruition, we have the experience and knowledge to achieve an excellent job. The level 5 drywall finish represents a smart investment for homeowners, as these small details will make a difference in your home or office, giving it a more luxurious look.

Level 5 finishing of drywall near me?
We carry out finishing works of level 5 drywall in drywall in: Alameda, Berkeley, Dublin, Fremont, Hayward, Livermore, Oakland, Pleasanton, Union City, San Leandro, Sacramento, San Francisco, Napa, San Jose, Santa Rosa, San Mateo, Santa Clara, Palo Alto, City of Sequoia and Sonoma. So, if you are looking for level 5 drywall finishing services near me, don’t hesitate to contact us right now. We offer drywall contractor services in the san francisco bay area, california.