Drywall and Taping

Drywall Installation

The United States is the leading consumer, producer, and innovator in the installation of residential and office drywall.

The installation of drywall has recently become popular for its easy handling, cleaning and quick installation. Many people believe that drywall is brittle or that they leave a lot of cement and sand dirt, but drywall is tough and very clean materials.

In the walls of drywall, there are no cracks and that is why they are the fastest and most efficient way to build. New Line Drywall is a company specialized in all aspects of the installation of drywall.

Our goal is to create the best possible environment in your home or office and for that, we have a very efficient drywall installation team to offer you the best finishes in your drywall at an excellent price.

The Drywall Installation Process

Exist a ceiling is a false ceiling that is placed under the real roof to hide cable and pipe installations or to reduce the height of the mezzanine.

Fake Ceiling

This is a false ceiling that consists of a completely smooth surface in which the structure that supports the drywall is not visible.

Smooth Ceilings

Reticular Ceiling

Smooth Ceilings

The process of installing drywall on smooth panels is as follows:

To trace the height of the ceiling.
Installation of the mooring modules that will support the ceiling in the walls of the room or office where the installation of the drywall will be done.
Placement of anchors on the real roof by drilling with holes.
Cut of galvanized wire sections of a length equal to that existing between the actual ceiling and the fake ceiling.
Bend the ends of the wire so that they make a hook that holds the load gutters and is deposited there.
Tie the crossings of these gutters with the wire and they are leveled for the placement of the drywall.
Install the drywall.

Reticular Ceiling

The reticular ceiling is a false ceiling that consists of a drywall supported by a visible structure in the form of a network.

The process of installing drywall on reticular panels is as follows:

To trace the height of the ceiling.
Installation of the mooring modules that will support the ceiling in the walls of the room or office where the installation of the drywall will be done.
Placement of anchors on the real roof by drilling with holes.
Cut of galvanized wire sections of a length equal to that existing between the actual ceiling and the fake ceiling.
Bend the ends of the wire so that they make a hook that holds the load gutters and is deposited there.
Tie the crossings of these gutters with the wire and they are leveled for the placement of the drywall.

Up to this moment, the installation process is the same as that of the smooth ceiling, from here the process is different:

Mark on the real roof the location of the main T and connecting T.
The perforations of the main Ts are deposited on the hooks of the hanging wire, they are held, leveled and they are tied by reaffirming the mooring with metal screws.
Insertion of the connecting T perpendicular to the main T.
Install the drywall.

Request a Quote!

Drywall and taping - Commercial Renovation

Drywall Repair

Drywall is one of the most commonly used materials for building walls inside a house in the United States.

However, its exposure to different environmental conditions, such as changes in temperature and humidity, earthquakes, deformation of structural elements and even installation errors, are the main causes for cracks in the walls and it is necessary to perform drywall repair.

The Drywall Repair Process for Dents

The Drywall Repair Process for Small Holes

The Drywall Repair Process For Medium Openings

The Drywall Repair Process For Large Holes

Final Drywall Repair

The Drywall Repair Process for Dents

If the repair is done by a dent, the edges must first be sanded to remove loose particles, then apply the joint compound to fill said sinking of the drywall surface, to finish the repaired area is sanded again and paint is applied to erase the signal that there was a dent in that specific area.

The Drywall Repair Process for Small Holes

If the hole in the drywall was produced by something very small such as a nail, only a little joint compound is applied, a piece of joint tape is placed, the spatula is passed to leave the surface smooth and remove the excess of compound, after it dries the same process is applied a second time.

The Drywall Repair Process For Medium Openings

A rectangle is drawn around the hole in the drywall with the help of a ruler, then cut with a saw of drywall to leave the space of said hole for the subsequent installation of a new panel, the size of the hollow and cut a plasterboard of that same size leaving 10 centimeters more, then leave the cardboard of the remaining 10 centimeters and install it in the space where the hole is, proceed to apply compound and tape as normally done.

The Drywall Repair Process For Large Holes

A rectangle is also drawn around the hole in the drywall with the help of a ruler, then cut with a saw of drywall to leave the space of said hole for the subsequent installation of a new panel, the size is measured from the hole and plasterboard of that same size is cut leaving 10 centimeters more but in this case support tables are placed behind the surface of the affected panel so that after being adjusted with screws through the affected panel the installation is performed of the new panel.

Final Drywall Repair

For more demanding repair processes, in New Line Drywall we have a team specialized in the repair of drywall to eliminate holes, cracks and water damage in your walls permanently, we know that these damages can become very annoying for you.

That is why our drywall repair work is characterized, as is the installation of drywall for being a clean job and that does not leave cement dirt and dust, all so that this repair meets your expectations.

You don’t have to worry, with our specialized team, repairing drywall will be a very simple process that can be done in just a few hours. So get in touch with us right now.

Request a Quote!

FAQ

How to Repair Drywall?

In our section of drywall repair, we mention the step by step of the said repair process in case of dents, small, medium, large holes and even the repair of the final drywall.

How to Finish Drywall?

If you want to know about the different levels of drywall finishes we have a section about it for level 4 of finishes and one for level 5 of drywall finishes in which we talk about each one.

What is the Drywall?

The drywall is a material that is used in walls especially for construction and remodeling projects, whether residential or commercial. Being composed mainly of plaster, it has great advantages, including ease of use and installation, its resistance to sounds and its soft texture make it the most professional option for construction.

Drywall Repair Near Me?

We install drywall in the following cities in the state of California: Alameda, Berkeley, Dublin, Fremont, Hayward, Livermore, Oakland, Pleasanton, Union City, San Leandro, Sacramento, San Francisco, Napa, San José , Santa Rosa, San Mateo, Santa Clara, Palo Alto, City of Sequoia and Sonoma.

Why New Line Drywall?

Our contractors have the experience, knowledge and all the tools to perform an excellent installation of drywall. The main advantage of drywall is that if you hire a team specialized in the installation of drywall you will have speed in the construction process thanks to the ease of installation. If you want to know how much the drywall costs, request your budget right now.